- Greenstone DispensaryHome
- Tropf Blumat Set - 3M (12 cones)
- Tropf Blumat Set - 3M (12 cones)




Tropf Blumat Set - 3M (12 cones)
- Category: Craft Cultivation
- Description
- 12 Cones (sensors)
- A Rain Tank Connector for your water reservoir
- 7m of 8mm tubing and connectors
- 12 Cones (sensors)
- A Rain Tank Connector for your water reservoir
- 7m of 8mm tubing and connectors
An Unlimited Bartab For Your Floral Friends
The Blumat Tropf Automatic Watering System is a top quality modular watering system that is affordable and easy to install. No need for electricity or mains pressure, now you can keep your soil at optimum water level adjustable via a pressure valve. Can be run from your mains water supply using the pressure reducer, or by using a low pressure raised water reservoir.
Check out this video for more details about the installation process and basic function.
You set the sensors (“carrots”) by filling them with water and soaking for an hour. Water your garden bed to the optimum level, then place your sensors in the soil. No batteries or cheap electronic sensors, it works using the magic of physics and new age ceramics.
Place your Tropf Blumat Sensor near to the roots of your plants, push it down to the depth indicated on the sensor. Make sure the drip irrigator is about 8cm away from your sensor for the best results.
The Tropf-Blumat works on the tensiometer principle; The Tropf Blumat sensor draws water via a thin tubing. As the soil dries, the organic ceramic sensor creates a natural suction which then draws water through the system. Once the soil is sufficiently moist, the ceramic sensor will reduce suction thus stopping the flow.
Most computer-controlled systems rely on timers, which do not take the soil moisture level into account and will not account for
Made in Germany, this system is
Kit Includes
Pro Tips
Check out our range of Blumat Tropf products here for extensions and peripherals to enhance your system.
An Unlimited Bartab For Your Floral Friends
The Blumat Tropf Automatic Watering System is a top quality modular watering system that is affordable and easy to install. No need for electricity or mains pressure, now you can keep your soil at optimum water level adjustable via a pressure valve. Can be run from your mains water supply using the pressure reducer, or by using a low pressure raised water reservoir.
Check out this video for more details about the installation process and basic function.
You set the sensors (“carrots”) by filling them with water and soaking for an hour. Water your garden bed to the optimum level, then place your sensors in the soil. No batteries or cheap electronic sensors, it works using the magic of physics and new age ceramics.
Place your Tropf Blumat Sensor near to the roots of your plants, push it down to the depth indicated on the sensor. Make sure the drip irrigator is about 8cm away from your sensor for the best results.
The Tropf-Blumat works on the tensiometer principle; The Tropf Blumat sensor draws water via a thin tubing. As the soil dries, the organic ceramic sensor creates a natural suction which then draws water through the system. Once the soil is sufficiently moist, the ceramic sensor will reduce suction thus stopping the flow.
Most computer-controlled systems rely on timers, which do not take the soil moisture level into account and will not account for
Made in Germany, this system is
Kit Includes
Pro Tips
Check out our range of Blumat Tropf products here for extensions and peripherals to enhance your system.
Someone in just bought
Someone in just bought
Someone in just bought
Someone in just bought
Someone in just bought
Your question will appear on the site once someone answers it.
- Reviews (0)
- Questions (0)